Whole flat — floorplan

The four surveyed spaces stitched into one coordinate system for the first time: the main room and dining room (fused earlier, sharing the 283/284 wall), and now the hallway and Sar’s Office, placed using the hallway’s own survey rather than guesswork. Still to survey: the bedroom, the office, both bathrooms, and the understairs cupboard — see the open questions below.
38.4 m²main room + dining room
10.6 m²hallway
7.4 m²Sar’s Office
56.4 m²surveyed so far
5unsurveyed spaces

The flat, as surveyed

hall 10.6 m², surveyed Sar’s Office 7.4 m² — box only, rotation from the hallway fit garden doors new door kitchen party wall run murphy bed flat front door existing dining room door Main room 29.7 m² Dining room 8.7 m² ↑ G A R D E N 1 m
surveyed room kitchen party wall run murphy bed, down door
How this got put together. The main room and dining room were already fused — they share the 283/284 wall directly. Sar’s Office and the hallway used to be schematic guesses on this page. Now that the hallway is surveyed door-to-door (closing to 3.3 cm on a 24-wall, ~23 m perimeter), it’s placed here by rotating and shifting its own survey so its main-room door and dining-room door land on the main room and dining room’s own already-known door positions — the same trick a surveyor uses to tie a new traverse into known control points. Sar’s Office is placed the same way, off the hallway’s own Sar’s Office door, but is still drawn as a simple box rather than its real 15-wall stepped shape (see its own plan for that).

What’s settled

Needs verification / still open